Heavy Snowfall, Rain, Hurricane Winds - Our Durable Roof Vents are Engineered and Tested for…
Get a Feel for the Venturi Effect: Our Passive Aura Vents are Designed to Draw Out Hot Air by Creating a Vacuum
Our Aura Roof Vents do not move, but provide active suction through a patented inner and outer louver design that makes use of the Venturi effect. Check out this engineer’s testimonial after purchasing two Aura Vents for his house in southeast Tennessee. He read about our Aura Vent’s unique design, and after installing them to the roof, he immediately noticed the difference.
I have a ranch style 1800 sq foot house in southeast Tennessee. I wanted to increase the ventilation in my attic. I searched the internet for active roof vents with no moving parts. I am an engineer and had done quite a bit of research on passive roof vents.
I found the Aura Vents on your web site and read the documentation on the Aura Vent’s capabilities to move hot air from the attic with no electricity or moving parts. The technical reports were quite convincing. I bought two AV-14 vents and had them installed when I reoofed the house. Right away I could feel the hot air being sucked out of the attic.
I am impressed with the results I have gotten with my Aura-Vents and highly recommend them.
The Aura Ventilator™ uses minimal wind power and no moving parts. The wind enters the unit through a set of exterior vertical louvers, producing the necessary vacuum to extract excess moisture through a second set of interior louvers. As demonstrated from this view from above, air enters vent from the front (left side of diagram), passing through exterior louvers into the inner chamber, where it circulates and picks up speed. As a result, a vacuum draws up the warm vapors from beneath the vent into the middle section. These vapors enter the inner chamber through the interior louvers and circulate together with the air which had entered from outside, until they both forcefully exit through the back of the vent (the right side of the diagram).